Husqvarna DM 200 Specs, Capacity & Compatibility

VERIFIED SPECIFICATION · ACTIVE · Last verified 2026-08-21

4" handheld & stand-mounted concrete core drill

Maximum diameter: 4"
Power: 2.68 hp
Voltage: 100-120 V
Speeds: 1250 / 2600 RPM
Spindle: 1-1/4"-7 UNC
Handheld: Yes
Stand capable: Yes
Wet drilling: Yes
Dry drilling: Yes
Safety clutch: Unknown / Not specified by manufacturer
Machine weight: 11.5 lb

Values are taken from manufacturer documentation and official manuals where cited in Sources. No-load 1250 / 2600 RPM; full-load 800 / 1700 RPM (operator manual)

Find Compatible Bits Build Complete System Best Core Drills

Not sold on Amazon. Available through authorized Husqvarna dealers.

Decision Summary

Specification analysis for Husqvarna DM 200 based on verified manufacturer manuals and operator documentation.

✓ Best Suited For

Light handheld wet or dry drilling coring on 1-1/4"-7 UNC after capacity conflict is understood.

✕ Who Should Skip

You need an unambiguous handheld concrete capacity without source disagreement.

Verified specification table

Specification	Value	Source status
Maximum diameter	4"	Manufacturer verified
Voltage	100-120 V	Manufacturer verified
Power	2.68 hp	Manufacturer verified
Low gear / min RPM	1250	Manual verified
High gear / max RPM	2600	Manual verified
Spindle	1-1/4"-7 UNC	Manual verified
Handheld	Yes	Manual verified
Stand capable	Yes	Manual verified
Safety clutch	Unknown / Not specified by manufacturer	not listed
Water feed	Yes	Manual verified
Wet drilling	Yes	Manufacturer verified
Dry drilling	Yes	Manufacturer verified
Reinforced concrete	No	Manufacturer verified
Machine / net weight	11.5 lb	Manufacturer verified

Source links appear in Sources & Verification below, not invented ratings.

Bit & Rig Compatibility

Spindle interface, bit connection standards, and rig pairing documentation.

Spindle Connection: 1-1/4"-7 UNC

This machine utilizes a 1-1/4"-7 UNC spindle. Diamond core bits matching this connection thread directly without adapters. Mismatched threads require a documented rigid arbor adapter.

Compatible core bits

Mechanical fit is not the same as a safe operating-speed fit. Bit published max RPM wins when lower than the machine gear.

SPEC-MATCHED 🟡

Hilti SPX-L Heavy Rebar Wet Core Bits 1/2″

SPEC-MATCHED 🟡

Connection Hilti BL Quick-Release / 1-1/4"-7 UNC ✓
Diameter 0.5" ✓
Machine capacity 4"
Method Wet
OEM pairing Not OEM-documented
Mechanical fit Aligned
Operating speed Unknown / incomplete RPM data
OEM fit Not OEM-documented

View Bit Details Check RPM

Milwaukee 48-17-5006 0.625″ Diamond Core Bit

SPEC-MATCHED 🟡

Connection 1-1/4"-7 UNC Female ✓
Diameter 0.625" ✓
Machine capacity 4"
Method Wet
OEM pairing Not OEM-documented
Mechanical fit Aligned
Operating speed Within published range
OEM fit Not OEM-documented

View Bit Details Check RPM

Milwaukee 48-17-5007 0.75″ Diamond Core Bit

SPEC-MATCHED 🟡

Connection 1-1/4"-7 UNC Female ✓
Diameter 0.75" ✓
Machine capacity 4"
Method Wet
OEM pairing Not OEM-documented
Mechanical fit Aligned
Operating speed Within published range
OEM fit Not OEM-documented

View Bit Details Check RPM

Milwaukee 48-17-5009 0.875″ Diamond Core Bit

SPEC-MATCHED 🟡

Connection 1-1/4"-7 UNC Female ✓
Diameter 0.875" ✓
Machine capacity 4"
Method Wet
OEM pairing Not OEM-documented
Mechanical fit Aligned
Operating speed Within published range
OEM fit Not OEM-documented

View Bit Details Check RPM

BLUEROCK Wet 1″ Diamond Core Bit

SPEC-MATCHED 🟡

Connection 1-1/4"-7 UNC Female ✓
Diameter 1" ✓
Machine capacity 4"
Method Wet
OEM pairing Not OEM-documented
Mechanical fit Aligned
Operating speed Unknown / incomplete RPM data
OEM fit Not OEM-documented

View Bit Details Check RPM

Hilti SPX-L Heavy Rebar Wet Core Bits 1″

SPEC-MATCHED 🟡

Connection Hilti BL Quick-Release / 1-1/4"-7 UNC ✓
Diameter 1" ✓
Machine capacity 4"
Method Wet
OEM pairing Not OEM-documented
Mechanical fit Aligned
Operating speed Unknown / incomplete RPM data
OEM fit Not OEM-documented

View Bit Details Check RPM

Milwaukee 48-17-5010 1″ Diamond Core Bit

SPEC-MATCHED 🟡

Connection 1-1/4"-7 UNC Female ✓
Diameter 1" ✓
Machine capacity 4"
Method Wet
OEM pairing Not OEM-documented
Mechanical fit Aligned
Operating speed Within published range
OEM fit Not OEM-documented

View Bit Details Check RPM

Husqvarna VARI-DRILL Dry D20 Core Bits 1-1/4″

SPEC-MATCHED 🟡

Connection 5/8"-11 UNC & 1-1/4"-7 UNC ✓
Diameter 1.25" ✓
Machine capacity 4"
Method Dry
OEM pairing Not OEM-documented
Mechanical fit Aligned
Operating speed Unknown / incomplete RPM data
OEM fit Not OEM-documented

View Bit Details Check RPM

Find more compatible bits

RPM / gear guidance

No-load 1250 / 2600 RPM; full-load 800 / 1700 RPM (operator manual)

Documented RPM: 1250 / 2600

Open RPM Calculator

Stand / adapter compatibility

Stand model: Unknown / Not specified by manufacturer
Stand compatibility: Stand-capable per OEM; stand SKU separate, confirm DS/collar fit
OEM / documented stands:
- husqvarna-ds-150, Interface supported (Collar interface class, OEM table incomplete for DM 200 → Interface supported)
Adapter requirements: Unknown / Not specified by manufacturer
Adapter support: Unknown / Not specified by manufacturer

Water / slurry / dust

Documented water / collection:
- husqvarna-wsr-100, OEM verified WSR fits-to includes DM 200
Documented dust management:
- husqvarna-vacuum-kit-575872201, OEM verified Vacuum kit fits DM 200

Jobsite Setup & Operation

Operational workflow, slurry/water management, mounting procedures, and operator safety.

Water / slurry / dust

Documented water / collection:
- husqvarna-wsr-100, OEM verified WSR fits-to includes DM 200
Documented dust management:
- husqvarna-vacuum-kit-575872201, OEM verified Vacuum kit fits DM 200

Ownership & Service

Lifecycle status: CURRENT
Warranty evidence: UNKNOWN, UNKNOWN exact years for this SKU, see Husqvarna Construction US Limited Warranty
OEM service: OEM service available, OEM service via Husqvarna Construction authorized servicing dealer/center network (Manufacturer Documentation).
Replacement parts status: Data incomplete
Not verified: specific replacement SKUs not confirmed in current OEM documentation for this model.
Last serviceability verification: 2026-08-21

Authoritative Sources & Verification

CoringSpec specifications are extracted directly from primary manufacturer documentation and operator manuals. We do not invent lab scores or extrapolate unverified ratings.

Verified Documentation

Primary manufacturer technical specifications and published operator documentation on file.

Research & Verification Standards: This equipment profile was audited and verified against primary manufacturer technical documentation by the CoringSpec Technical Editorial Team. Specifications confirmed active as of 2026-08-21.

Read Our Research Methodology · Report a Specification Correction