Shibuya TS-405 / H2231 Heavy Rig Diamond Core Drill Specs & Compatibility

VERIFIED SPECIFICATION · ACTIVE · Last verified 2026-09-05

16" stand-mounted rig concrete core drill

Maximum diameter: 16"
Power: 3450W
Voltage: 110-120V AC, 50/60 Hz
Speeds: 300 / 1400 RPM
Spindle: 1-1/4"-7 UNC / A-Rod
Handheld: Unknown / Not specified by manufacturer
Stand capable: Yes
Wet drilling: Yes
Dry drilling: Unknown / Not specified by manufacturer
Safety clutch: Unknown / Not specified by manufacturer
Machine weight: Not clearly specified by manufacturer

Values are taken from manufacturer documentation and official manuals where cited in Sources. No-load: Gear 1: 300 RPM, Gear 2: 700 RPM, Gear 3: 1400 RPM | Rated-load: Gear 1: 230 RPM, Gear 2: 550 RPM, Gear 3: 1080 RPM

Find Compatible Bits Build Complete System Best Core Drills

Not sold on Amazon. Available through authorized Shibuya dealers.

Decision Summary

Specification analysis for Shibuya TS-405 based on verified manufacturer manuals and operator documentation.

✓ Best Suited For

Contractors, core drilling specialists, and trades requiring documented core drilling capacity with verified bit compatibility.

✕ Who Should Skip

Operators requiring larger commercial diameters beyond machine rating, or standard rotary hammer SDS drilling.

Verified specification table

Specification	Value	Source status
Maximum diameter	16"	Catalog verified
Voltage	110-120V AC, 50/60 Hz	Catalog verified
Power	3450W	Catalog verified
Low gear / min RPM	300	Catalog verified
High gear / max RPM	1400	Catalog verified
Spindle	1-1/4"-7 UNC / A-Rod	Catalog verified
Handheld	Unknown / Not specified by manufacturer	not listed
Stand capable	Yes	Catalog verified
Safety clutch	Unknown / Not specified by manufacturer	not listed
Water feed	Unknown / Not specified by manufacturer	not listed
Wet drilling	Yes	Catalog verified
Dry drilling	Unknown / Not specified by manufacturer	not listed
Reinforced concrete	Unknown / Not specified by manufacturer	not listed
Machine / net weight	Not clearly specified by manufacturer	not listed

Source links appear in Sources & Verification below, not invented ratings.

Bit & Rig Compatibility

Spindle interface, bit connection standards, and rig pairing documentation.

Spindle Connection: 1-1/4"-7 UNC / A-Rod

This machine utilizes a 1-1/4"-7 UNC / A-Rod spindle. Diamond core bits matching this connection thread directly without adapters. Mismatched threads require a documented rigid arbor adapter.

Compatible core bits

Mechanical fit is not the same as a safe operating-speed fit. Bit published max RPM wins when lower than the machine gear.

SPEC-MATCHED 🟡

Hilti SPX-L Heavy Rebar Wet Core Bits 1/2″

SPEC-MATCHED 🟡

Connection Hilti BL Quick-Release / 1-1/4"-7 UNC ✓
Diameter 0.5" ✓
Machine capacity 16"
Method Wet
OEM pairing Not OEM-documented
Mechanical fit Aligned
Operating speed Unknown / incomplete RPM data
OEM fit Not OEM-documented

View Bit Details Check RPM

Milwaukee 48-17-5006 0.625″ Diamond Core Bit

SPEC-MATCHED 🟡

Connection 1-1/4"-7 UNC Female ✓
Diameter 0.625" ✓
Machine capacity 16"
Method Wet
OEM pairing Not OEM-documented
Mechanical fit Aligned
Operating speed Within published range
OEM fit Not OEM-documented

View Bit Details Check RPM

Milwaukee 48-17-5007 0.75″ Diamond Core Bit

SPEC-MATCHED 🟡

Connection 1-1/4"-7 UNC Female ✓
Diameter 0.75" ✓
Machine capacity 16"
Method Wet
OEM pairing Not OEM-documented
Mechanical fit Aligned
Operating speed Within published range
OEM fit Not OEM-documented

View Bit Details Check RPM

Milwaukee 48-17-5009 0.875″ Diamond Core Bit

SPEC-MATCHED 🟡

Connection 1-1/4"-7 UNC Female ✓
Diameter 0.875" ✓
Machine capacity 16"
Method Wet
OEM pairing Not OEM-documented
Mechanical fit Aligned
Operating speed Within published range
OEM fit Not OEM-documented

View Bit Details Check RPM

BLUEROCK Wet 1″ Diamond Core Bit

SPEC-MATCHED 🟡

Connection 1-1/4"-7 UNC Female ✓
Diameter 1" ✓
Machine capacity 16"
Method Wet
OEM pairing Not OEM-documented
Mechanical fit Aligned
Operating speed Unknown / incomplete RPM data
OEM fit Not OEM-documented

View Bit Details Check RPM

Hilti SPX-L Heavy Rebar Wet Core Bits 1″

SPEC-MATCHED 🟡

Connection Hilti BL Quick-Release / 1-1/4"-7 UNC ✓
Diameter 1" ✓
Machine capacity 16"
Method Wet
OEM pairing Not OEM-documented
Mechanical fit Aligned
Operating speed Unknown / incomplete RPM data
OEM fit Not OEM-documented

View Bit Details Check RPM

Milwaukee 48-17-5010 1″ Diamond Core Bit

SPEC-MATCHED 🟡

Connection 1-1/4"-7 UNC Female ✓
Diameter 1" ✓
Machine capacity 16"
Method Wet
OEM pairing Not OEM-documented
Mechanical fit Aligned
Operating speed Within published range
OEM fit Not OEM-documented

View Bit Details Check RPM

Diamond Products Core Bore Premium Black Wet Core Bits 1-1/2″

SPEC-MATCHED 🟡

Connection 1-1/4"-7 UNC Female ✓
Diameter 1.5" ✓
Machine capacity 16"
Method Wet
OEM pairing Not OEM-documented
Mechanical fit Aligned
Operating speed Unknown / incomplete RPM data
OEM fit Not OEM-documented

View Bit Details Check RPM

Find more compatible bits

RPM / gear guidance

No-load: Gear 1: 300 RPM, Gear 2: 700 RPM, Gear 3: 1400 RPM | Rated-load: Gear 1: 230 RPM, Gear 2: 550 RPM, Gear 3: 1080 RPM

Documented RPM: 300 / 1400

Open RPM Calculator

Stand / adapter compatibility

Stand model: Unknown / Not specified by manufacturer
Stand compatibility: TS-405 standard 1003 mm column / Optional TS-405(AB61) 1060 mm heavy-duty column/base
Adapter requirements: Unknown / Not specified by manufacturer
Adapter support: Unknown / Not specified by manufacturer

Water / slurry / dust

No evidence-backed water or dust accessory edges stored for this motor yet, do not invent recommendations.

Jobsite Setup & Operation

Operational workflow, slurry/water management, mounting procedures, and operator safety.

Water / slurry / dust

No evidence-backed water or dust accessory edges stored for this motor yet, do not invent recommendations.

Ownership & Service

Serviceability not verified for this model yet, fields remain UNKNOWN (not “parts unavailable”).

Authoritative Sources & Verification

CoringSpec specifications are extracted directly from primary manufacturer documentation and operator manuals. We do not invent lab scores or extrapolate unverified ratings.

Verified Documentation

Primary manufacturer technical specifications and published operator documentation on file.

Research & Verification Standards: This equipment profile was audited and verified against primary manufacturer technical documentation by the CoringSpec Technical Editorial Team. Specifications confirmed active as of 2026-09-05.

Read Our Research Methodology · Report a Specification Correction