Core Bit Finder

Select your drill. CoringSpec loads thread, adapters, and capacity automatically. Results use the same compatibility engine as drill pages: VERIFIED FIT, SPEC-MATCHED, ADAPTER REQUIRED, with reasons shown.

Select your drill Machine setup Material Hole diameter (inches) Hole depth (inches) Wet / Dry Reinforcement level Preferred brand (optional)

Thread/arbor loads from the selected drill. Compatibility always shows why, never “compatible” from thread alone.

Bit Finder returns bit family + matching diameter variants for the selected drill, not 70 SEO product pages. Engine: CoringSpec_Decision.

Selected drill

Husqvarna DMS 240 Complete Rig Specs

Thread / spindle: 1-1/4"-7 UNC Male (Outer) / G 1/2" Female (Inner)
Handheld max: Unknown / Not specified by manufacturer"
Stand max: 10"
Wet / dry: Yes / Yes
RPM / gears (manufacturer/OEM): Position 1: 390 rpm idle; Position 2: 890 rpm idle (OEM OM)

Compatible bits (174 variants shown)

Husqvarna DRI-5 Vacuum · 2" variant

VERIFIED FIT

Verified Fit, VERIFIED FIT ✅

Family: DRI-5 Vacuum
Matching diameter variant: 2"
Connection: 1-1/4"-7 UNC
Working depth: 10"
Material / reinforcement: LIGHT
Wet / dry: Dry
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC
Diameter	2"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	LIGHT
Method	Dry
Working depth	Confirm on bit record
OEM pairing	Verified
RPM	UNKNOWN

View Bit Specs Calculator-derived RPM guidance

Husqvarna DRI-8 · 2" variant

VERIFIED FIT

Verified Fit, VERIFIED FIT ✅

Family: DRI-8
Matching diameter variant: 2"
Connection: 1-1/4"-7 UNC
Working depth: 10"
Material / reinforcement: LIGHT
Wet / dry: Dry
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC
Diameter	2"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	LIGHT
Method	Dry
Working depth	Confirm on bit record
OEM pairing	Verified
RPM	UNKNOWN

View Bit Specs Calculator-derived RPM guidance Check Amazon

Milwaukee Diamond Ultra Wet · 0.625" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Diamond Ultra Wet
Matching diameter variant: 0.625"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: MEDIUM

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	0.625"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	Within published range

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance Check Amazon

Milwaukee Diamond Ultra Wet · 0.75" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Diamond Ultra Wet
Matching diameter variant: 0.75"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: MEDIUM

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	0.75"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	Within published range

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance Check Amazon

Milwaukee Diamond Ultra Wet · 0.875" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Diamond Ultra Wet
Matching diameter variant: 0.875"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: MEDIUM

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	0.875"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	Within published range

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance Check Amazon

Milwaukee Diamond Ultra Wet · 1" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Diamond Ultra Wet
Matching diameter variant: 1"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: MEDIUM

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	1"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	Within published range

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance Check Amazon

Milwaukee Diamond Ultra Dry · 1.25" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Diamond Ultra Dry
Matching diameter variant: 1.25"
Connection: 1-1/4"-7 UNC
Working depth: 13"
Material / reinforcement: LIGHT
Wet / dry: Dry
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: MEDIUM

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC
Diameter	1.25"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	LIGHT
Method	Dry
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	Within published range

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Milwaukee Diamond Ultra Wet · 1.5" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Diamond Ultra Wet
Matching diameter variant: 1.5"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: MEDIUM

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	1.5"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	Within published range

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

EDiamondTools Wet Premium (WBP A4) · 2" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Wet Premium (WBP A4)
Matching diameter variant: 2"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: LIGHT
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: MEDIUM

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	2"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	LIGHT
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance Check Amazon

Milwaukee Diamond Ultra Dry · 2" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Diamond Ultra Dry
Matching diameter variant: 2"
Connection: 1-1/4"-7 UNC
Working depth: 13"
Material / reinforcement: LIGHT
Wet / dry: Dry
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: MEDIUM

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC
Diameter	2"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	LIGHT
Method	Dry
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	Within published range

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Milwaukee Diamond Ultra Wet · 2" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Diamond Ultra Wet
Matching diameter variant: 2"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: MEDIUM

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	2"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	Within published range

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance Check Amazon

Milwaukee Diamond Ultra Dry · 2.5" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Diamond Ultra Dry
Matching diameter variant: 2.5"
Connection: 1-1/4"-7 UNC
Working depth: 13"
Material / reinforcement: LIGHT
Wet / dry: Dry
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: MEDIUM

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC
Diameter	2.5"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	LIGHT
Method	Dry
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	Within published range

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance Check Amazon

Milwaukee Diamond Ultra Wet · 2.5" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Diamond Ultra Wet
Matching diameter variant: 2.5"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: MEDIUM

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	2.5"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	Within published range

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

EDiamondTools Wet Premium (WBP A4) · 3" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Wet Premium (WBP A4)
Matching diameter variant: 3"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: LIGHT
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: MEDIUM

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	3"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	LIGHT
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance Check Amazon

Milwaukee Diamond Ultra Dry · 3" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Diamond Ultra Dry
Matching diameter variant: 3"
Connection: 1-1/4"-7 UNC
Working depth: 13"
Material / reinforcement: LIGHT
Wet / dry: Dry
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: MEDIUM

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC
Diameter	3"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	LIGHT
Method	Dry
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	Within published range

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance Check Amazon

Milwaukee Diamond Ultra Wet · 3" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Diamond Ultra Wet
Matching diameter variant: 3"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: MEDIUM

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	3"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	Review required

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance Check Amazon

Milwaukee Diamond Ultra Dry · 3.5" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Diamond Ultra Dry
Matching diameter variant: 3.5"
Connection: 1-1/4"-7 UNC
Working depth: 13"
Material / reinforcement: LIGHT
Wet / dry: Dry
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: MEDIUM

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC
Diameter	3.5"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	LIGHT
Method	Dry
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	Within published range

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance Check Amazon

Milwaukee Diamond Ultra Wet · 3.5" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Diamond Ultra Wet
Matching diameter variant: 3.5"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: MEDIUM

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	3.5"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	Review required

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance Check Amazon

EDiamondTools Wet Premium (WBP A4) · 4" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Wet Premium (WBP A4)
Matching diameter variant: 4"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: LIGHT
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: MEDIUM

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	4"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	LIGHT
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance Check Amazon

Milwaukee Diamond Ultra Dry · 4" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Diamond Ultra Dry
Matching diameter variant: 4"
Connection: 1-1/4"-7 UNC
Working depth: 13"
Material / reinforcement: LIGHT
Wet / dry: Dry
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: MEDIUM

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC
Diameter	4"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	LIGHT
Method	Dry
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	Within published range

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance Check Amazon

Milwaukee Diamond Ultra Wet · 4" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Diamond Ultra Wet
Matching diameter variant: 4"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: MEDIUM

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	4"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	Review required

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance Check Amazon

Milwaukee Diamond Ultra Wet · 4.5" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Diamond Ultra Wet
Matching diameter variant: 4.5"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: MEDIUM

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	4.5"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	Review required

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

EDiamondTools Wet Premium (WBP A4) · 5" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Wet Premium (WBP A4)
Matching diameter variant: 5"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: LIGHT
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: MEDIUM

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	5"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	LIGHT
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance Check Amazon

Milwaukee Diamond Ultra Dry · 5" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Diamond Ultra Dry
Matching diameter variant: 5"
Connection: 1-1/4"-7 UNC
Working depth: 13"
Material / reinforcement: LIGHT
Wet / dry: Dry
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: MEDIUM

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC
Diameter	5"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	LIGHT
Method	Dry
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	Review required

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance Check Amazon

Milwaukee Diamond Ultra Wet · 5" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Diamond Ultra Wet
Matching diameter variant: 5"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: MEDIUM

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	5"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	Review required

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance Check Amazon

Milwaukee Diamond Ultra Dry · 6" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Diamond Ultra Dry
Matching diameter variant: 6"
Connection: 1-1/4"-7 UNC
Working depth: 13"
Material / reinforcement: LIGHT
Wet / dry: Dry
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: MEDIUM

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC
Diameter	6"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	LIGHT
Method	Dry
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	Review required

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Milwaukee Diamond Ultra Wet · 6" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Diamond Ultra Wet
Matching diameter variant: 6"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: MEDIUM

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	6"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	Review required

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance Check Amazon

Hilti Hilti SPX-T Dry Tile & Anchor Core Bits 1/4″ · 0.25" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Hilti SPX-T Dry Tile & Anchor Core Bits 1/4″
Matching diameter variant: 0.25"
Connection: 5/8"-11 UNC / M14
Working depth: 1.5"
Material / reinforcement: Non-reinforced
Wet / dry: Dry
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 5/8"-11 UNC / M14
Diameter	0.25"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Not specified
Method	Dry
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Hilti Hilti SPX-T Dry Tile & Anchor Core Bits 5/16″ · 0.3125" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Hilti SPX-T Dry Tile & Anchor Core Bits 5/16″
Matching diameter variant: 0.3125"
Connection: 5/8"-11 UNC / M14
Working depth: 1.5"
Material / reinforcement: Non-reinforced
Wet / dry: Dry
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 5/8"-11 UNC / M14
Diameter	0.3125"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Not specified
Method	Dry
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Hilti Hilti SPX-T Dry Tile & Anchor Core Bits 3/8″ · 0.375" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Hilti SPX-T Dry Tile & Anchor Core Bits 3/8″
Matching diameter variant: 0.375"
Connection: 5/8"-11 UNC / M14
Working depth: 1.5"
Material / reinforcement: Non-reinforced
Wet / dry: Dry
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 5/8"-11 UNC / M14
Diameter	0.375"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Not specified
Method	Dry
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Hilti Hilti SPX-L Heavy Rebar Wet Core Bits 1/2″ · 0.5" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Hilti SPX-L Heavy Rebar Wet Core Bits 1/2″
Matching diameter variant: 0.5"
Connection: Hilti BL Quick-Release / 1-1/4"-7 UNC
Working depth: 17.7"
Material / reinforcement: HEAVY
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct Hilti BL Quick-Release / 1-1/4"-7 UNC
Diameter	0.5"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	HEAVY
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Hilti Hilti SPX-T Dry Tile & Anchor Core Bits 1/2″ · 0.5" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Hilti SPX-T Dry Tile & Anchor Core Bits 1/2″
Matching diameter variant: 0.5"
Connection: 5/8"-11 UNC / M14
Working depth: 1.5"
Material / reinforcement: Non-reinforced
Wet / dry: Dry
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 5/8"-11 UNC / M14
Diameter	0.5"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Not specified
Method	Dry
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Hilti Hilti SPX-T Dry Tile & Anchor Core Bits 3/4″ · 0.75" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Hilti SPX-T Dry Tile & Anchor Core Bits 3/4″
Matching diameter variant: 0.75"
Connection: 5/8"-11 UNC / M14
Working depth: 1.5"
Material / reinforcement: Non-reinforced
Wet / dry: Dry
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 5/8"-11 UNC / M14
Diameter	0.75"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Not specified
Method	Dry
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

BLUEROCK Dry · 1" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Dry
Matching diameter variant: 1"
Connection: 5/8"-11 UNC
Working depth: 10"
Material / reinforcement: Not specified
Wet / dry: Dry
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: OEM Documented

Compatibility detail

Drill connection	Direct 5/8"-11 UNC
Diameter	1"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Not specified
Method	Dry
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance Check Amazon

BLUEROCK Wet · 1" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Wet
Matching diameter variant: 1"
Connection: 1-1/4"-7 UNC Female
Working depth: 14.5"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: OEM Documented

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	1"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance Check Amazon

Hilti Hilti SPX-L Heavy Rebar Wet Core Bits 1″ · 1" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Hilti SPX-L Heavy Rebar Wet Core Bits 1″
Matching diameter variant: 1"
Connection: Hilti BL Quick-Release / 1-1/4"-7 UNC
Working depth: 17.7"
Material / reinforcement: HEAVY
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct Hilti BL Quick-Release / 1-1/4"-7 UNC
Diameter	1"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	HEAVY
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Hilti Hilti SPX-T Dry Tile & Anchor Core Bits 1″ · 1" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Hilti SPX-T Dry Tile & Anchor Core Bits 1″
Matching diameter variant: 1"
Connection: 5/8"-11 UNC / M14
Working depth: 1.5"
Material / reinforcement: Non-reinforced
Wet / dry: Dry
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 5/8"-11 UNC / M14
Diameter	1"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Not specified
Method	Dry
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

BLUEROCK Dry · 1.25" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Dry
Matching diameter variant: 1.25"
Connection: 5/8"-11 UNC
Working depth: 10"
Material / reinforcement: Not specified
Wet / dry: Dry
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: OEM Documented

Compatibility detail

Drill connection	Direct 5/8"-11 UNC
Diameter	1.25"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Not specified
Method	Dry
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance Check Amazon

Husqvarna Husqvarna VARI-DRILL Dry D20 Core Bits 1-1/4″ · 1.25" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Husqvarna VARI-DRILL Dry D20 Core Bits 1-1/4″
Matching diameter variant: 1.25"
Connection: 5/8"-11 UNC & 1-1/4"-7 UNC
Working depth: 12"
Material / reinforcement: LIGHT
Wet / dry: Dry
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 5/8"-11 UNC & 1-1/4"-7 UNC
Diameter	1.25"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	LIGHT
Method	Dry
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

BLUEROCK Dry · 1.5" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Dry
Matching diameter variant: 1.5"
Connection: 5/8"-11 UNC
Working depth: 10"
Material / reinforcement: Not specified
Wet / dry: Dry
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: OEM Documented

Compatibility detail

Drill connection	Direct 5/8"-11 UNC
Diameter	1.5"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Not specified
Method	Dry
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance Check Amazon

CS Unitec CS Unitec CS Unitec Dry Masonry Core Bits 1-1/2″ · 1.5" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: CS Unitec CS Unitec Dry Masonry Core Bits 1-1/2″
Matching diameter variant: 1.5"
Connection: M16 / 5/8"-11 UNC
Working depth: 8"
Material / reinforcement: Non-reinforced
Wet / dry: Dry
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct M16 / 5/8"-11 UNC
Diameter	1.5"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Not specified
Method	Dry
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Diamond Products Diamond Products Core Bore Premium Black Wet Core Bits 1-1/2″ · 1.5" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Diamond Products Core Bore Premium Black Wet Core Bits 1-1/2″
Matching diameter variant: 1.5"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: HEAVY
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	1.5"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	HEAVY
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Diamond Products Diamond Products CP Series Dry Masonry Core Bits 1-1/2″ · 1.5" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Diamond Products CP Series Dry Masonry Core Bits 1-1/2″
Matching diameter variant: 1.5"
Connection: 5/8"-11 UNC Female
Working depth: 10"
Material / reinforcement: Non-reinforced
Wet / dry: Dry
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 5/8"-11 UNC Female
Diameter	1.5"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Not specified
Method	Dry
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

EDiamondTools EDiamondTools Laser-Welded Dry Rebar Core Bits 1-1/2″ · 1.5" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: EDiamondTools Laser-Welded Dry Rebar Core Bits 1-1/2″
Matching diameter variant: 1.5"
Connection: 5/8"-11 UNC Female
Working depth: 10"
Material / reinforcement: MEDIUM
Wet / dry: Dry
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 5/8"-11 UNC Female
Diameter	1.5"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Dry
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Hilti Hilti P-U Premium Universal Wet/Dry Core Bits 1-1/2″ · 1.5" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Hilti P-U Premium Universal Wet/Dry Core Bits 1-1/2″
Matching diameter variant: 1.5"
Connection: Hilti BI / 5/8"-11 UNC
Working depth: 17.7"
Material / reinforcement: MEDIUM
Wet / dry: Wet/Dry
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct Hilti BI / 5/8"-11 UNC
Diameter	1.5"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet / Dry
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Husqvarna Husqvarna Elite-Drill D1410 High-Speed Wet Core Bits 1-1/2″ · 1.5" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Husqvarna Elite-Drill D1410 High-Speed Wet Core Bits 1-1/2″
Matching diameter variant: 1.5"
Connection: 1-1/4"-7 UNC Female
Working depth: 18"
Material / reinforcement: HEAVY
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	1.5"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	HEAVY
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Shibuya Shibuya Shibuya Blue Bit Heavy Rebar Wet Core Bits 1-1/2″ · 1.5" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Shibuya Shibuya Blue Bit Heavy Rebar Wet Core Bits 1-1/2″
Matching diameter variant: 1.5"
Connection: 1-1/4"-7 UNC & A-Rod
Working depth: 14"
Material / reinforcement: HEAVY
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC & A-Rod
Diameter	1.5"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	HEAVY
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

AGP AGP AGP Dry Laser Core Bits with Dust Channels 2″ · 2" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: AGP AGP Dry Laser Core Bits with Dust Channels 2″
Matching diameter variant: 2"
Connection: M16 / 5/8"-11 UNC
Working depth: 12"
Material / reinforcement: Non-reinforced
Wet / dry: Dry
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct M16 / 5/8"-11 UNC
Diameter	2"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Not specified
Method	Dry
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

BLUEROCK BLUEROCK BLUEROCK Supreme High Speed Wet Core Bits 2″ · 2" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: BLUEROCK BLUEROCK Supreme High Speed Wet Core Bits 2″
Matching diameter variant: 2"
Connection: 1-1/4"-7 UNC Female
Working depth: 17"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	2"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

BLUEROCK Dry · 2" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Dry
Matching diameter variant: 2"
Connection: 5/8"-11 UNC
Working depth: 10"
Material / reinforcement: Not specified
Wet / dry: Dry
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: OEM Documented

Compatibility detail

Drill connection	Direct 5/8"-11 UNC
Diameter	2"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Not specified
Method	Dry
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance Check Amazon

BLUEROCK Wet · 2" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Wet
Matching diameter variant: 2"
Connection: 1-1/4"-7 UNC Female
Working depth: 14.5"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: OEM Documented

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	2"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance Check Amazon

Cardi Cardi Cardi Professional Wet Core Bits 2″ · 2" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Cardi Cardi Professional Wet Core Bits 2″
Matching diameter variant: 2"
Connection: 1-1/4"-7 UNC Female
Working depth: 17.7"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	2"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

CS Unitec CS Unitec CS Unitec Dry Masonry Core Bits 2″ · 2" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: CS Unitec CS Unitec Dry Masonry Core Bits 2″
Matching diameter variant: 2"
Connection: M16 / 5/8"-11 UNC
Working depth: 8"
Material / reinforcement: Non-reinforced
Wet / dry: Dry
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct M16 / 5/8"-11 UNC
Diameter	2"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Not specified
Method	Dry
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

CS Unitec CS Unitec CS Unitec Premium Wet Core Bits 2″ · 2" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: CS Unitec CS Unitec Premium Wet Core Bits 2″
Matching diameter variant: 2"
Connection: 1-1/4"-7 UNC Female
Working depth: 18"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	2"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Diamond Products Diamond Products Core Bore Premium Black Wet Core Bits 2″ · 2" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Diamond Products Core Bore Premium Black Wet Core Bits 2″
Matching diameter variant: 2"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: HEAVY
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	2"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	HEAVY
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Diamond Products Diamond Products CP Series Dry Masonry Core Bits 2″ · 2" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Diamond Products CP Series Dry Masonry Core Bits 2″
Matching diameter variant: 2"
Connection: 5/8"-11 UNC Female
Working depth: 10"
Material / reinforcement: Non-reinforced
Wet / dry: Dry
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 5/8"-11 UNC Female
Diameter	2"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Not specified
Method	Dry
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Diamond Products Diamond Products Heavy Duty Orange Wet Core Bits 2″ · 2" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Diamond Products Heavy Duty Orange Wet Core Bits 2″
Matching diameter variant: 2"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	2"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance Check Amazon

EDiamondTools EDiamondTools Heavy-Duty Asphalt & Green Concrete Core Bits 2″ · 2" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: EDiamondTools Heavy-Duty Asphalt & Green Concrete Core Bits 2″
Matching diameter variant: 2"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: Non-reinforced (abrasive)
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	2"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Not specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

EDiamondTools EDiamondTools Laser-Welded Dry Rebar Core Bits 2″ · 2" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: EDiamondTools Laser-Welded Dry Rebar Core Bits 2″
Matching diameter variant: 2"
Connection: 5/8"-11 UNC Female
Working depth: 10"
Material / reinforcement: MEDIUM
Wet / dry: Dry
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 5/8"-11 UNC Female
Diameter	2"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Dry
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Hilti Hilti P-U Premium Universal Wet/Dry Core Bits 2″ · 2" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Hilti P-U Premium Universal Wet/Dry Core Bits 2″
Matching diameter variant: 2"
Connection: Hilti BI / 5/8"-11 UNC
Working depth: 17.7"
Material / reinforcement: MEDIUM
Wet / dry: Wet/Dry
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct Hilti BI / 5/8"-11 UNC
Diameter	2"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet / Dry
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Hilti Hilti SPX-L Heavy Rebar Wet Core Bits 2″ · 2" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Hilti SPX-L Heavy Rebar Wet Core Bits 2″
Matching diameter variant: 2"
Connection: Hilti BL Quick-Release / 1-1/4"-7 UNC
Working depth: 17.7"
Material / reinforcement: HEAVY
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct Hilti BL Quick-Release / 1-1/4"-7 UNC
Diameter	2"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	HEAVY
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Husqvarna Husqvarna D1200 Diagrip Universal Wet Core Bits 2″ · 2" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Husqvarna D1200 Diagrip Universal Wet Core Bits 2″
Matching diameter variant: 2"
Connection: 1-1/4"-7 UNC Female
Working depth: 18"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	2"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Husqvarna D1610 · 2" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: D1610
Matching diameter variant: 2"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: OEM Documented

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	2"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Husqvarna Husqvarna Elite-Drill D1410 High-Speed Wet Core Bits 2″ · 2" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Husqvarna Elite-Drill D1410 High-Speed Wet Core Bits 2″
Matching diameter variant: 2"
Connection: 1-1/4"-7 UNC Female
Working depth: 18"
Material / reinforcement: HEAVY
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	2"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	HEAVY
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Husqvarna Husqvarna Tacti-Drill D35 Wet Core Bits 2″ · 2" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Husqvarna Tacti-Drill D35 Wet Core Bits 2″
Matching diameter variant: 2"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: LIGHT
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	2"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	LIGHT
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Husqvarna VARI-DRILL B80 · 2" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: VARI-DRILL B80
Matching diameter variant: 2"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: Not specified
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: MEDIUM

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	2"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Not specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: PARTIAL catalog entity, documented job fields may still match, not globally promoted to VERIFIED.

View Bit Specs Calculator-derived RPM guidance

Husqvarna Husqvarna VARI-DRILL Dry D20 Core Bits 2″ · 2" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Husqvarna VARI-DRILL Dry D20 Core Bits 2″
Matching diameter variant: 2"
Connection: 5/8"-11 UNC & 1-1/4"-7 UNC
Working depth: 12"
Material / reinforcement: LIGHT
Wet / dry: Dry
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 5/8"-11 UNC & 1-1/4"-7 UNC
Diameter	2"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	LIGHT
Method	Dry
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Milwaukee Milwaukee Milwaukee MX FUEL High-Output Wet Core Bits 2″ · 2" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Milwaukee Milwaukee MX FUEL High-Output Wet Core Bits 2″
Matching diameter variant: 2"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: HEAVY
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	2"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	HEAVY
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Shibuya Shibuya Shibuya Blue Bit Heavy Rebar Wet Core Bits 2″ · 2" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Shibuya Shibuya Blue Bit Heavy Rebar Wet Core Bits 2″
Matching diameter variant: 2"
Connection: 1-1/4"-7 UNC & A-Rod
Working depth: 14"
Material / reinforcement: HEAVY
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC & A-Rod
Diameter	2"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	HEAVY
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Shibuya Shibuya Shibuya Gold Bit Hard Aggregate Wet Core Bits 2″ · 2" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Shibuya Shibuya Gold Bit Hard Aggregate Wet Core Bits 2″
Matching diameter variant: 2"
Connection: 1-1/4"-7 UNC & A-Rod
Working depth: 14"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC & A-Rod
Diameter	2"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Weka Weka Weka German Wet Core Bits 2″ · 2" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Weka Weka German Wet Core Bits 2″
Matching diameter variant: 2"
Connection: 1-1/4"-7 UNC Female
Working depth: 18"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	2"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

BLUEROCK Dry · 2.5" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Dry
Matching diameter variant: 2.5"
Connection: 5/8"-11 UNC
Working depth: 10"
Material / reinforcement: Not specified
Wet / dry: Dry
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: OEM Documented

Compatibility detail

Drill connection	Direct 5/8"-11 UNC
Diameter	2.5"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Not specified
Method	Dry
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance Check Amazon

Diamond Products Diamond Products CP Series Dry Masonry Core Bits 2-1/2″ · 2.5" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Diamond Products CP Series Dry Masonry Core Bits 2-1/2″
Matching diameter variant: 2.5"
Connection: 5/8"-11 UNC Female
Working depth: 10"
Material / reinforcement: Non-reinforced
Wet / dry: Dry
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 5/8"-11 UNC Female
Diameter	2.5"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Not specified
Method	Dry
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

EDiamondTools EDiamondTools Laser-Welded Dry Rebar Core Bits 2-1/2″ · 2.5" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: EDiamondTools Laser-Welded Dry Rebar Core Bits 2-1/2″
Matching diameter variant: 2.5"
Connection: 5/8"-11 UNC Female
Working depth: 10"
Material / reinforcement: MEDIUM
Wet / dry: Dry
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 5/8"-11 UNC Female
Diameter	2.5"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Dry
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Shibuya Shibuya Shibuya Blue Bit Heavy Rebar Wet Core Bits 2-1/2″ · 2.5" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Shibuya Shibuya Blue Bit Heavy Rebar Wet Core Bits 2-1/2″
Matching diameter variant: 2.5"
Connection: 1-1/4"-7 UNC & A-Rod
Working depth: 14"
Material / reinforcement: HEAVY
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC & A-Rod
Diameter	2.5"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	HEAVY
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

AGP AGP AGP Dry Laser Core Bits with Dust Channels 3″ · 3" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: AGP AGP Dry Laser Core Bits with Dust Channels 3″
Matching diameter variant: 3"
Connection: M16 / 5/8"-11 UNC
Working depth: 12"
Material / reinforcement: Non-reinforced
Wet / dry: Dry
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct M16 / 5/8"-11 UNC
Diameter	3"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Not specified
Method	Dry
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

BLUEROCK BLUEROCK BLUEROCK Supreme High Speed Wet Core Bits 3″ · 3" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: BLUEROCK BLUEROCK Supreme High Speed Wet Core Bits 3″
Matching diameter variant: 3"
Connection: 1-1/4"-7 UNC Female
Working depth: 17"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	3"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

BLUEROCK Dry · 3" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Dry
Matching diameter variant: 3"
Connection: 5/8"-11 UNC
Working depth: 10"
Material / reinforcement: Not specified
Wet / dry: Dry
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: OEM Documented

Compatibility detail

Drill connection	Direct 5/8"-11 UNC
Diameter	3"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Not specified
Method	Dry
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance Check Amazon

BLUEROCK Wet · 3" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Wet
Matching diameter variant: 3"
Connection: 1-1/4"-7 UNC Female
Working depth: 14.5"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: OEM Documented

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	3"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance Check Amazon

Cardi Cardi Cardi Professional Wet Core Bits 3″ · 3" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Cardi Cardi Professional Wet Core Bits 3″
Matching diameter variant: 3"
Connection: 1-1/4"-7 UNC Female
Working depth: 17.7"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	3"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

CS Unitec CS Unitec CS Unitec Dry Masonry Core Bits 3″ · 3" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: CS Unitec CS Unitec Dry Masonry Core Bits 3″
Matching diameter variant: 3"
Connection: M16 / 5/8"-11 UNC
Working depth: 8"
Material / reinforcement: Non-reinforced
Wet / dry: Dry
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct M16 / 5/8"-11 UNC
Diameter	3"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Not specified
Method	Dry
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

CS Unitec CS Unitec CS Unitec Premium Wet Core Bits 3″ · 3" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: CS Unitec CS Unitec Premium Wet Core Bits 3″
Matching diameter variant: 3"
Connection: 1-1/4"-7 UNC Female
Working depth: 18"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	3"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Diamond Products Diamond Products Core Bore Premium Black Wet Core Bits 3″ · 3" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Diamond Products Core Bore Premium Black Wet Core Bits 3″
Matching diameter variant: 3"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: HEAVY
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	3"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	HEAVY
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Diamond Products Diamond Products CP Series Dry Masonry Core Bits 3″ · 3" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Diamond Products CP Series Dry Masonry Core Bits 3″
Matching diameter variant: 3"
Connection: 5/8"-11 UNC Female
Working depth: 10"
Material / reinforcement: Non-reinforced
Wet / dry: Dry
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 5/8"-11 UNC Female
Diameter	3"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Not specified
Method	Dry
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Diamond Products Diamond Products Heavy Duty Orange Wet Core Bits 3″ · 3" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Diamond Products Heavy Duty Orange Wet Core Bits 3″
Matching diameter variant: 3"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	3"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

EDiamondTools EDiamondTools Heavy-Duty Asphalt & Green Concrete Core Bits 3″ · 3" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: EDiamondTools Heavy-Duty Asphalt & Green Concrete Core Bits 3″
Matching diameter variant: 3"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: Non-reinforced (abrasive)
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	3"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Not specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

EDiamondTools EDiamondTools Laser-Welded Dry Rebar Core Bits 3″ · 3" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: EDiamondTools Laser-Welded Dry Rebar Core Bits 3″
Matching diameter variant: 3"
Connection: 5/8"-11 UNC Female
Working depth: 10"
Material / reinforcement: MEDIUM
Wet / dry: Dry
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 5/8"-11 UNC Female
Diameter	3"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Dry
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Hilti SP-L Masonry · 3" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: SP-L Masonry
Matching diameter variant: 3"
Connection: 5/8"-11 UNC
Working depth: 10"
Material / reinforcement: NONE
Wet / dry: Dry
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 5/8"-11 UNC
Diameter	3"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	NONE
Method	Dry
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Hilti Hilti P-U Premium Universal Wet/Dry Core Bits 3″ · 3" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Hilti P-U Premium Universal Wet/Dry Core Bits 3″
Matching diameter variant: 3"
Connection: Hilti BI / 5/8"-11 UNC
Working depth: 17.7"
Material / reinforcement: MEDIUM
Wet / dry: Wet/Dry
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct Hilti BI / 5/8"-11 UNC
Diameter	3"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet / Dry
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Hilti Hilti SPX-L Heavy Rebar Wet Core Bits 3″ · 3" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Hilti SPX-L Heavy Rebar Wet Core Bits 3″
Matching diameter variant: 3"
Connection: Hilti BL Quick-Release / 1-1/4"-7 UNC
Working depth: 17.7"
Material / reinforcement: HEAVY
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct Hilti BL Quick-Release / 1-1/4"-7 UNC
Diameter	3"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	HEAVY
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Husqvarna Husqvarna D1200 Diagrip Universal Wet Core Bits 3″ · 3" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Husqvarna D1200 Diagrip Universal Wet Core Bits 3″
Matching diameter variant: 3"
Connection: 1-1/4"-7 UNC Female
Working depth: 18"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	3"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Husqvarna D1610 · 3" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: D1610
Matching diameter variant: 3"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: OEM Documented

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	3"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Husqvarna Husqvarna Elite-Drill D1410 High-Speed Wet Core Bits 3″ · 3" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Husqvarna Elite-Drill D1410 High-Speed Wet Core Bits 3″
Matching diameter variant: 3"
Connection: 1-1/4"-7 UNC Female
Working depth: 18"
Material / reinforcement: HEAVY
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	3"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	HEAVY
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Husqvarna Husqvarna Tacti-Drill D35 Wet Core Bits 3″ · 3" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Husqvarna Tacti-Drill D35 Wet Core Bits 3″
Matching diameter variant: 3"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: LIGHT
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	3"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	LIGHT
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Husqvarna VARI-DRILL B80 · 3" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: VARI-DRILL B80
Matching diameter variant: 3"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: Not specified
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: MEDIUM

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	3"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Not specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: PARTIAL catalog entity, documented job fields may still match, not globally promoted to VERIFIED.

View Bit Specs Calculator-derived RPM guidance

Husqvarna Husqvarna VARI-DRILL Dry D20 Core Bits 3″ · 3" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Husqvarna VARI-DRILL Dry D20 Core Bits 3″
Matching diameter variant: 3"
Connection: 5/8"-11 UNC & 1-1/4"-7 UNC
Working depth: 12"
Material / reinforcement: LIGHT
Wet / dry: Dry
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 5/8"-11 UNC & 1-1/4"-7 UNC
Diameter	3"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	LIGHT
Method	Dry
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Milwaukee Milwaukee Milwaukee MX FUEL High-Output Wet Core Bits 3″ · 3" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Milwaukee Milwaukee MX FUEL High-Output Wet Core Bits 3″
Matching diameter variant: 3"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: HEAVY
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	3"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	HEAVY
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Shibuya Shibuya Shibuya Blue Bit Heavy Rebar Wet Core Bits 3″ · 3" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Shibuya Shibuya Blue Bit Heavy Rebar Wet Core Bits 3″
Matching diameter variant: 3"
Connection: 1-1/4"-7 UNC & A-Rod
Working depth: 14"
Material / reinforcement: HEAVY
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC & A-Rod
Diameter	3"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	HEAVY
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Shibuya Shibuya Shibuya Gold Bit Hard Aggregate Wet Core Bits 3″ · 3" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Shibuya Shibuya Gold Bit Hard Aggregate Wet Core Bits 3″
Matching diameter variant: 3"
Connection: 1-1/4"-7 UNC & A-Rod
Working depth: 14"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC & A-Rod
Diameter	3"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

VEVOR Wet Core Bit · 3" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Wet Core Bit
Matching diameter variant: 3"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	3"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Weka Weka Weka German Wet Core Bits 3″ · 3" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Weka Weka German Wet Core Bits 3″
Matching diameter variant: 3"
Connection: 1-1/4"-7 UNC Female
Working depth: 18"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	3"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

AGP AGP AGP Dry Laser Core Bits with Dust Channels 4″ · 4" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: AGP AGP Dry Laser Core Bits with Dust Channels 4″
Matching diameter variant: 4"
Connection: M16 / 5/8"-11 UNC
Working depth: 12"
Material / reinforcement: Non-reinforced
Wet / dry: Dry
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct M16 / 5/8"-11 UNC
Diameter	4"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Not specified
Method	Dry
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

BLUEROCK BLUEROCK BLUEROCK Supreme High Speed Wet Core Bits 4″ · 4" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: BLUEROCK BLUEROCK Supreme High Speed Wet Core Bits 4″
Matching diameter variant: 4"
Connection: 1-1/4"-7 UNC Female
Working depth: 17"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	4"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

BLUEROCK Dry · 4" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Dry
Matching diameter variant: 4"
Connection: 5/8"-11 UNC
Working depth: 10"
Material / reinforcement: Not specified
Wet / dry: Dry
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: OEM Documented

Compatibility detail

Drill connection	Direct 5/8"-11 UNC
Diameter	4"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Not specified
Method	Dry
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance Check Amazon

BLUEROCK Wet · 4" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Wet
Matching diameter variant: 4"
Connection: 1-1/4"-7 UNC Female
Working depth: 14.5"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: OEM Documented

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	4"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance Check Amazon

Cardi Cardi Cardi Professional Wet Core Bits 4″ · 4" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Cardi Cardi Professional Wet Core Bits 4″
Matching diameter variant: 4"
Connection: 1-1/4"-7 UNC Female
Working depth: 17.7"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	4"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

CS Unitec CS Unitec CS Unitec Dry Masonry Core Bits 4″ · 4" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: CS Unitec CS Unitec Dry Masonry Core Bits 4″
Matching diameter variant: 4"
Connection: M16 / 5/8"-11 UNC
Working depth: 8"
Material / reinforcement: Non-reinforced
Wet / dry: Dry
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct M16 / 5/8"-11 UNC
Diameter	4"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Not specified
Method	Dry
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

CS Unitec CS Unitec CS Unitec Premium Wet Core Bits 4″ · 4" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: CS Unitec CS Unitec Premium Wet Core Bits 4″
Matching diameter variant: 4"
Connection: 1-1/4"-7 UNC Female
Working depth: 18"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	4"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Diamond Products Diamond Products Core Bore Premium Black Wet Core Bits 4″ · 4" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Diamond Products Core Bore Premium Black Wet Core Bits 4″
Matching diameter variant: 4"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: HEAVY
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	4"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	HEAVY
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Diamond Products Diamond Products CP Series Dry Masonry Core Bits 4″ · 4" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Diamond Products CP Series Dry Masonry Core Bits 4″
Matching diameter variant: 4"
Connection: 5/8"-11 UNC Female
Working depth: 10"
Material / reinforcement: Non-reinforced
Wet / dry: Dry
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 5/8"-11 UNC Female
Diameter	4"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Not specified
Method	Dry
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Diamond Products Diamond Products Heavy Duty Orange Wet Core Bits 4″ · 4" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Diamond Products Heavy Duty Orange Wet Core Bits 4″
Matching diameter variant: 4"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	4"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance Check Amazon

EDiamondTools EDiamondTools Heavy-Duty Asphalt & Green Concrete Core Bits 4″ · 4" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: EDiamondTools Heavy-Duty Asphalt & Green Concrete Core Bits 4″
Matching diameter variant: 4"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: Non-reinforced (abrasive)
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	4"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Not specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

EDiamondTools EDiamondTools Laser-Welded Dry Rebar Core Bits 4″ · 4" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: EDiamondTools Laser-Welded Dry Rebar Core Bits 4″
Matching diameter variant: 4"
Connection: 5/8"-11 UNC Female
Working depth: 10"
Material / reinforcement: MEDIUM
Wet / dry: Dry
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 5/8"-11 UNC Female
Diameter	4"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Dry
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Hilti Hilti P-U Premium Universal Wet/Dry Core Bits 4″ · 4" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Hilti P-U Premium Universal Wet/Dry Core Bits 4″
Matching diameter variant: 4"
Connection: Hilti BI / 5/8"-11 UNC
Working depth: 17.7"
Material / reinforcement: MEDIUM
Wet / dry: Wet/Dry
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct Hilti BI / 5/8"-11 UNC
Diameter	4"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet / Dry
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Hilti Hilti SPX-L Heavy Rebar Wet Core Bits 4″ · 4" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Hilti SPX-L Heavy Rebar Wet Core Bits 4″
Matching diameter variant: 4"
Connection: Hilti BL Quick-Release / 1-1/4"-7 UNC
Working depth: 17.7"
Material / reinforcement: HEAVY
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct Hilti BL Quick-Release / 1-1/4"-7 UNC
Diameter	4"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	HEAVY
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Husqvarna Husqvarna D1200 Diagrip Universal Wet Core Bits 4″ · 4" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Husqvarna D1200 Diagrip Universal Wet Core Bits 4″
Matching diameter variant: 4"
Connection: 1-1/4"-7 UNC Female
Working depth: 18"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	4"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Husqvarna D1610 · 4" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: D1610
Matching diameter variant: 4"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: OEM Documented

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	4"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Husqvarna Husqvarna Elite-Drill D1410 High-Speed Wet Core Bits 4″ · 4" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Husqvarna Elite-Drill D1410 High-Speed Wet Core Bits 4″
Matching diameter variant: 4"
Connection: 1-1/4"-7 UNC Female
Working depth: 18"
Material / reinforcement: HEAVY
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	4"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	HEAVY
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Husqvarna Husqvarna Tacti-Drill D35 Wet Core Bits 4″ · 4" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Husqvarna Tacti-Drill D35 Wet Core Bits 4″
Matching diameter variant: 4"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: LIGHT
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	4"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	LIGHT
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Husqvarna VARI-DRILL B80 · 4" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: VARI-DRILL B80
Matching diameter variant: 4"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: Not specified
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: MEDIUM

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	4"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Not specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: PARTIAL catalog entity, documented job fields may still match, not globally promoted to VERIFIED.

View Bit Specs Calculator-derived RPM guidance

Husqvarna Husqvarna VARI-DRILL Dry D20 Core Bits 4″ · 4" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Husqvarna VARI-DRILL Dry D20 Core Bits 4″
Matching diameter variant: 4"
Connection: 5/8"-11 UNC & 1-1/4"-7 UNC
Working depth: 12"
Material / reinforcement: LIGHT
Wet / dry: Dry
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 5/8"-11 UNC & 1-1/4"-7 UNC
Diameter	4"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	LIGHT
Method	Dry
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Milwaukee Milwaukee Milwaukee MX FUEL High-Output Wet Core Bits 4″ · 4" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Milwaukee Milwaukee MX FUEL High-Output Wet Core Bits 4″
Matching diameter variant: 4"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: HEAVY
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	4"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	HEAVY
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Shibuya Shibuya Shibuya Blue Bit Heavy Rebar Wet Core Bits 4″ · 4" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Shibuya Shibuya Blue Bit Heavy Rebar Wet Core Bits 4″
Matching diameter variant: 4"
Connection: 1-1/4"-7 UNC & A-Rod
Working depth: 14"
Material / reinforcement: HEAVY
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC & A-Rod
Diameter	4"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	HEAVY
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Shibuya Shibuya Shibuya Gold Bit Hard Aggregate Wet Core Bits 4″ · 4" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Shibuya Shibuya Gold Bit Hard Aggregate Wet Core Bits 4″
Matching diameter variant: 4"
Connection: 1-1/4"-7 UNC & A-Rod
Working depth: 14"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC & A-Rod
Diameter	4"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

VEVOR Wet Core Bit · 4" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Wet Core Bit
Matching diameter variant: 4"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	4"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Weka Weka Weka German Wet Core Bits 4″ · 4" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Weka Weka German Wet Core Bits 4″
Matching diameter variant: 4"
Connection: 1-1/4"-7 UNC Female
Working depth: 18"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	4"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

BLUEROCK BLUEROCK BLUEROCK Supreme High Speed Wet Core Bits 5″ · 5" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: BLUEROCK BLUEROCK Supreme High Speed Wet Core Bits 5″
Matching diameter variant: 5"
Connection: 1-1/4"-7 UNC Female
Working depth: 17"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	5"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

BLUEROCK Wet · 5" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Wet
Matching diameter variant: 5"
Connection: 1-1/4"-7 UNC Female
Working depth: 14.5"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: OEM Documented

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	5"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance Check Amazon

CS Unitec CS Unitec CS Unitec Premium Wet Core Bits 5″ · 5" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: CS Unitec CS Unitec Premium Wet Core Bits 5″
Matching diameter variant: 5"
Connection: 1-1/4"-7 UNC Female
Working depth: 18"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	5"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Diamond Products Diamond Products Core Bore Premium Black Wet Core Bits 5″ · 5" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Diamond Products Core Bore Premium Black Wet Core Bits 5″
Matching diameter variant: 5"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: HEAVY
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	5"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	HEAVY
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Husqvarna B1420 · 5" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: B1420
Matching diameter variant: 5"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: HEAVY
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	5"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	HEAVY
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Husqvarna D1610 · 5" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: D1610
Matching diameter variant: 5"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: OEM Documented

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	5"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Husqvarna Husqvarna Tacti-Drill D35 Wet Core Bits 5″ · 5" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Husqvarna Tacti-Drill D35 Wet Core Bits 5″
Matching diameter variant: 5"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: LIGHT
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	5"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	LIGHT
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Husqvarna VARI-DRILL B80 · 5" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: VARI-DRILL B80
Matching diameter variant: 5"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: Not specified
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: MEDIUM

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	5"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Not specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: PARTIAL catalog entity, documented job fields may still match, not globally promoted to VERIFIED.

View Bit Specs Calculator-derived RPM guidance

Husqvarna Husqvarna VARI-DRILL Dry D20 Core Bits 5″ · 5" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Husqvarna VARI-DRILL Dry D20 Core Bits 5″
Matching diameter variant: 5"
Connection: 5/8"-11 UNC & 1-1/4"-7 UNC
Working depth: 12"
Material / reinforcement: LIGHT
Wet / dry: Dry
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 5/8"-11 UNC & 1-1/4"-7 UNC
Diameter	5"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	LIGHT
Method	Dry
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Shibuya Shibuya Shibuya Blue Bit Heavy Rebar Wet Core Bits 5″ · 5" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Shibuya Shibuya Blue Bit Heavy Rebar Wet Core Bits 5″
Matching diameter variant: 5"
Connection: 1-1/4"-7 UNC & A-Rod
Working depth: 14"
Material / reinforcement: HEAVY
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC & A-Rod
Diameter	5"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	HEAVY
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

VEVOR Wet Core Bit · 5" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Wet Core Bit
Matching diameter variant: 5"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	5"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance Check Amazon

AGP AGP AGP Dry Laser Core Bits with Dust Channels 6″ · 6" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: AGP AGP Dry Laser Core Bits with Dust Channels 6″
Matching diameter variant: 6"
Connection: M16 / 5/8"-11 UNC
Working depth: 12"
Material / reinforcement: Non-reinforced
Wet / dry: Dry
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct M16 / 5/8"-11 UNC
Diameter	6"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Not specified
Method	Dry
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

BLUEROCK BLUEROCK BLUEROCK Supreme High Speed Wet Core Bits 6″ · 6" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: BLUEROCK BLUEROCK Supreme High Speed Wet Core Bits 6″
Matching diameter variant: 6"
Connection: 1-1/4"-7 UNC Female
Working depth: 17"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	6"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

BLUEROCK Wet · 6" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Wet
Matching diameter variant: 6"
Connection: 1-1/4"-7 UNC Female
Working depth: 14.5"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: OEM Documented

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	6"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance Check Amazon

Cardi Cardi Cardi Professional Wet Core Bits 6″ · 6" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Cardi Cardi Professional Wet Core Bits 6″
Matching diameter variant: 6"
Connection: 1-1/4"-7 UNC Female
Working depth: 17.7"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	6"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

CS Unitec CS Unitec CS Unitec Premium Wet Core Bits 6″ · 6" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: CS Unitec CS Unitec Premium Wet Core Bits 6″
Matching diameter variant: 6"
Connection: 1-1/4"-7 UNC Female
Working depth: 18"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	6"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Diamond Products Diamond Products Core Bore Premium Black Wet Core Bits 6″ · 6" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Diamond Products Core Bore Premium Black Wet Core Bits 6″
Matching diameter variant: 6"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: HEAVY
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	6"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	HEAVY
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Diamond Products Diamond Products Heavy Duty Orange Wet Core Bits 6″ · 6" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Diamond Products Heavy Duty Orange Wet Core Bits 6″
Matching diameter variant: 6"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	6"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance Check Amazon

EDiamondTools EDiamondTools Heavy-Duty Asphalt & Green Concrete Core Bits 6″ · 6" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: EDiamondTools Heavy-Duty Asphalt & Green Concrete Core Bits 6″
Matching diameter variant: 6"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: Non-reinforced (abrasive)
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	6"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Not specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Hilti Hilti P-U Premium Universal Wet/Dry Core Bits 6″ · 6" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Hilti P-U Premium Universal Wet/Dry Core Bits 6″
Matching diameter variant: 6"
Connection: Hilti BI / 5/8"-11 UNC
Working depth: 17.7"
Material / reinforcement: MEDIUM
Wet / dry: Wet/Dry
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct Hilti BI / 5/8"-11 UNC
Diameter	6"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet / Dry
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Hilti Hilti SPX-L Heavy Rebar Wet Core Bits 6″ · 6" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Hilti SPX-L Heavy Rebar Wet Core Bits 6″
Matching diameter variant: 6"
Connection: Hilti BL Quick-Release / 1-1/4"-7 UNC
Working depth: 17.7"
Material / reinforcement: HEAVY
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct Hilti BL Quick-Release / 1-1/4"-7 UNC
Diameter	6"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	HEAVY
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Husqvarna Husqvarna D1200 Diagrip Universal Wet Core Bits 6″ · 6" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Husqvarna D1200 Diagrip Universal Wet Core Bits 6″
Matching diameter variant: 6"
Connection: 1-1/4"-7 UNC Female
Working depth: 18"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	6"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Husqvarna D1610 · 6" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: D1610
Matching diameter variant: 6"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: OEM Documented

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	6"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Husqvarna Husqvarna Elite-Drill D1410 High-Speed Wet Core Bits 6″ · 6" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Husqvarna Elite-Drill D1410 High-Speed Wet Core Bits 6″
Matching diameter variant: 6"
Connection: 1-1/4"-7 UNC Female
Working depth: 18"
Material / reinforcement: HEAVY
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	6"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	HEAVY
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Husqvarna Husqvarna Tacti-Drill D35 Wet Core Bits 6″ · 6" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Husqvarna Tacti-Drill D35 Wet Core Bits 6″
Matching diameter variant: 6"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: LIGHT
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	6"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	LIGHT
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Husqvarna VARI-DRILL B80 · 6" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: VARI-DRILL B80
Matching diameter variant: 6"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: Not specified
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: MEDIUM

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	6"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Not specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: PARTIAL catalog entity, documented job fields may still match, not globally promoted to VERIFIED.

View Bit Specs Calculator-derived RPM guidance

Husqvarna Husqvarna VARI-DRILL Dry D20 Core Bits 6″ · 6" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Husqvarna VARI-DRILL Dry D20 Core Bits 6″
Matching diameter variant: 6"
Connection: 5/8"-11 UNC & 1-1/4"-7 UNC
Working depth: 12"
Material / reinforcement: LIGHT
Wet / dry: Dry
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 5/8"-11 UNC & 1-1/4"-7 UNC
Diameter	6"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	LIGHT
Method	Dry
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Milwaukee Milwaukee Milwaukee MX FUEL High-Output Wet Core Bits 6″ · 6" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Milwaukee Milwaukee MX FUEL High-Output Wet Core Bits 6″
Matching diameter variant: 6"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: HEAVY
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	6"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	HEAVY
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Shibuya Shibuya Shibuya Blue Bit Heavy Rebar Wet Core Bits 6″ · 6" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Shibuya Shibuya Blue Bit Heavy Rebar Wet Core Bits 6″
Matching diameter variant: 6"
Connection: 1-1/4"-7 UNC & A-Rod
Working depth: 14"
Material / reinforcement: HEAVY
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC & A-Rod
Diameter	6"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	HEAVY
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Shibuya Shibuya Shibuya Gold Bit Hard Aggregate Wet Core Bits 6″ · 6" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Shibuya Shibuya Gold Bit Hard Aggregate Wet Core Bits 6″
Matching diameter variant: 6"
Connection: 1-1/4"-7 UNC & A-Rod
Working depth: 14"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC & A-Rod
Diameter	6"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

VEVOR Wet Core Bit Set · 6" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Wet Core Bit Set
Matching diameter variant: 6"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	6"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance Check Amazon

Weka Weka Weka German Wet Core Bits 6″ · 6" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Weka Weka German Wet Core Bits 6″
Matching diameter variant: 6"
Connection: 1-1/4"-7 UNC Female
Working depth: 18"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	6"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Hilti SP-L Concrete · 6.5" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: SP-L Concrete
Matching diameter variant: 6.5"
Connection: 1-1/4"
Working depth: 16"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"
Diameter	6.5"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

BLUEROCK BLUEROCK BLUEROCK Supreme High Speed Wet Core Bits 8″ · 8" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: BLUEROCK BLUEROCK Supreme High Speed Wet Core Bits 8″
Matching diameter variant: 8"
Connection: 1-1/4"-7 UNC Female
Working depth: 17"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	8"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

BLUEROCK Wet · 8" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Wet
Matching diameter variant: 8"
Connection: 1-1/4"-7 UNC Female
Working depth: 14.5"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: OEM Documented

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	8"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance Check Amazon

CS Unitec CS Unitec CS Unitec Premium Wet Core Bits 8″ · 8" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: CS Unitec CS Unitec Premium Wet Core Bits 8″
Matching diameter variant: 8"
Connection: 1-1/4"-7 UNC Female
Working depth: 18"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	8"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Diamond Products Diamond Products Core Bore Premium Black Wet Core Bits 8″ · 8" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Diamond Products Core Bore Premium Black Wet Core Bits 8″
Matching diameter variant: 8"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: HEAVY
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	8"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	HEAVY
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Hilti Hilti SPX-L Heavy Rebar Wet Core Bits 8″ · 8" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Hilti SPX-L Heavy Rebar Wet Core Bits 8″
Matching diameter variant: 8"
Connection: Hilti BL Quick-Release / 1-1/4"-7 UNC
Working depth: 17.7"
Material / reinforcement: HEAVY
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct Hilti BL Quick-Release / 1-1/4"-7 UNC
Diameter	8"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	HEAVY
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Husqvarna Husqvarna D1200 Diagrip Universal Wet Core Bits 8″ · 8" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Husqvarna D1200 Diagrip Universal Wet Core Bits 8″
Matching diameter variant: 8"
Connection: 1-1/4"-7 UNC Female
Working depth: 18"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	8"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Husqvarna D1610 · 8" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: D1610
Matching diameter variant: 8"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: OEM Documented

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	8"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Husqvarna Husqvarna Elite-Drill D1410 High-Speed Wet Core Bits 8″ · 8" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Husqvarna Elite-Drill D1410 High-Speed Wet Core Bits 8″
Matching diameter variant: 8"
Connection: 1-1/4"-7 UNC Female
Working depth: 18"
Material / reinforcement: HEAVY
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	8"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	HEAVY
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Husqvarna VARI-DRILL B80 · 8" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: VARI-DRILL B80
Matching diameter variant: 8"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: Not specified
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: MEDIUM

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	8"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Not specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: PARTIAL catalog entity, documented job fields may still match, not globally promoted to VERIFIED.

View Bit Specs Calculator-derived RPM guidance

Milwaukee Milwaukee Milwaukee MX FUEL High-Output Wet Core Bits 8″ · 8" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Milwaukee Milwaukee MX FUEL High-Output Wet Core Bits 8″
Matching diameter variant: 8"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: HEAVY
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	8"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	HEAVY
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Shibuya Shibuya Shibuya Blue Bit Heavy Rebar Wet Core Bits 8″ · 8" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Shibuya Shibuya Blue Bit Heavy Rebar Wet Core Bits 8″
Matching diameter variant: 8"
Connection: 1-1/4"-7 UNC & A-Rod
Working depth: 14"
Material / reinforcement: HEAVY
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC & A-Rod
Diameter	8"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	HEAVY
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

VEVOR Wet Core Bit · 8" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Wet Core Bit
Matching diameter variant: 8"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	8"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

BLUEROCK Wet · 10" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Wet
Matching diameter variant: 10"
Connection: 1-1/4"-7 UNC Female
Working depth: 14.5"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: OEM Documented

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	10"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance Check Amazon

Diamond Products Diamond Products Core Bore Premium Black Wet Core Bits 10″ · 10" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: Diamond Products Core Bore Premium Black Wet Core Bits 10″
Matching diameter variant: 10"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: HEAVY
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: LOW

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	10"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	HEAVY
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Husqvarna D1610 · 10" variant

SPEC MATCHED

Best Spec Match, SPEC-MATCHED 🟡

Family: D1610
Matching diameter variant: 10"
Connection: 1-1/4"-7 UNC Female
Working depth: 14"
Material / reinforcement: MEDIUM
Wet / dry: Wet
RPM status: Manufacturer/OEM RPM on bit record, RPM data incomplete (calculator guidance is separate)
Fit path: Direct fit with selected drill (no adapter in this evaluation)
Evidence confidence: OEM Documented

Compatibility detail

Drill connection	Direct 1-1/4"-7 UNC Female
Diameter	10"
Drill capacity	Within 10"
Material	See bit record
Reinforcement	Manufacturer Specified
Method	Wet
Working depth	Confirm on bit record
OEM pairing	Not explicitly documented
RPM	UNKNOWN

Limitation: This bit requires wet drilling even though your drill also supports dry operation.

Limitation: Specifications align, but this drill/bit pairing is not explicitly documented by the manufacturers.

View Bit Specs Calculator-derived RPM guidance

Products for this page

Diamond core bit

VEVOR Wet Core Bit

5" shown · wet

Value wet coring 5" × 14" on handheld or stand drills with 1-1/4"-7 UNC.

Check on Amazon Specs

Diamond core bit

BLUEROCK Wet

4" shown · wet

Wet concrete/masonry coring at 4" on 1-1/4"-7 UNC machines within capacity.

Check on Amazon Specs

Diamond core bit

VEVOR Wet Core Bit Set

6" shown · wet

Value multi-size wet kit: 1, 2, 3, 4, 5, and 6" bits, universal 1-1/4"-7 UNC, 14" depth.

Check on Amazon Specs

Diamond core bit

BLUEROCK Dry

4" shown · dry

Dry masonry/concrete coring at 4" on 5/8"-11 UNC path (adapter on Z1 1-1/4"-7 UNC spindles).

Check on Amazon Specs

Paid links. Specs on this site come from manufacturer documentation, not from the retailer.